您的託付Your Trust Is
是我們的堅持Our Persistence
平板共軛凸輪式分割器
PU60DS
內含二片固定在入力軸的板型凸輪以及隨凸輪傳動的滾子轉塔出力軸，此分割器有平行共軛凸輪的機構設計，藉由接合於入力軸上的二片板形凸輪轉動而傳動滾子轉塔旋轉而達成出力軸分度的功能，供給節距較大的輸送帶傳動或用於停留時間較長的間歇分度。另有三片式重負荷型式，更適合一些快速且長節距的輸送，並且停留時間亦比二片式長。
PU60DS
外型線圖
規格
項目 符號 單位 數值 出力軸容許徑向負荷 P1 kgf 190 出力軸容許軸向負荷 P2 kgf 130 出力軸容許力矩 Ts kgf-m 參考力矩表 出力軸的旋轉剛性 K1 kgf-m/rad 6.8 x 10 2 入力軸容許軸向應力 P4 kgf 190 入力軸容許徑向負荷 P5 kgf 130 入力軸容許扭力 P6 kgf-m 8.5 入力軸的旋轉鋼性 K2 kgf-m2 6.8 x 102 1DWELL的分割精度 sec. ±60 2DWELL的分割精度 sec. ±120 重覆定位精度 sec. 60 重量 kg 16
入力軸的GD2是在停留範圍內的數值。 C1~C5數值是達到安全係數=2時的數值。 *本公司保有圖面修改之權利，詳細規格請與本公司聯絡。
| 項目 | 符號 | 單位 | 數值 |
|---|---|---|---|
| 出力軸容許徑向負荷 | P1 | kgf | 190 |
| 出力軸容許軸向負荷 | P2 | kgf | 130 |
| 出力軸容許力矩 | Ts | kgf-m | 參考力矩表 |
| 出力軸的旋轉剛性 | K1 | kgf-m/rad | 6.8 x 10 2 |
| 入力軸容許軸向應力 | P4 | kgf | 190 |
| 入力軸容許徑向負荷 | P5 | kgf | 130 |
| 入力軸容許扭力 | P6 | kgf-m | 8.5 |
| 入力軸的旋轉鋼性 | K2 | kgf-m2 | 6.8 x 102 |
| 1DWELL的分割精度 | sec. | ±60 | |
| 2DWELL的分割精度 | sec. | ±120 | |
| 重覆定位精度 | sec. | 60 | |
| 重量 | kg | 16 |
PU60DS
It consists of 2 plate cams fixed to the input shaft and a spider that supports the cam follower to the output shaft. This indexing drive has a plane cam mechanism designed so that the follower contacting the 2 plate cams on the input side serves to transmit rotation to the spider of the output shaft. Best suited for driving conveyors moving at large feed pitches or for intermittent indexing that stops at comparatively long intervals. The another is 3 plate cams designed as heavy load type. It more suits for conveyor rapid moving, stop at more long intervals and larger feed pitches.
PU60DS
Dimensions
Specification
Item Sym-bol Unit Value Allowable thrust load on output shaft P1 kgf 190 Allowable radial load on output shaft P2 kgf 130 Allowable torque on output shaft Ts kgf-m Refer torque table Output shaft rotary rigid K1 kgf-m/rad 6.8 x 10 2 Input shaft allowable axial stress P4 kgf 190 Allowable thrust load on input shaft P5 kgf 130 Allowable torque P6 kgf-m 8.5 Input shaft rotary rigid K2 kgf-m2 6.8 x 102 1DWELL segmentation accuracy sec. ±60 2DWELL segmentation accuracy sec. ±120 Repeat positioning accuracy sec. 60 Weight kg 16
GD2 of input shaft is a value in dwell range. Value of C1 to C5 are those obtained for safety factor=2. *The company reserves the right to modify the drawings, detailed specifications, please contact us.
| Item | Sym-bol | Unit | Value |
|---|---|---|---|
| Allowable thrust load on output shaft | P1 | kgf | 190 |
| Allowable radial load on output shaft | P2 | kgf | 130 |
| Allowable torque on output shaft | Ts | kgf-m | Refer torque table |
| Output shaft rotary rigid | K1 | kgf-m/rad | 6.8 x 10 2 |
| Input shaft allowable axial stress | P4 | kgf | 190 |
| Allowable thrust load on input shaft | P5 | kgf | 130 |
| Allowable torque | P6 | kgf-m | 8.5 |
| Input shaft rotary rigid | K2 | kgf-m2 | 6.8 x 102 |
| 1DWELL segmentation accuracy | sec. | ±60 | |
| 2DWELL segmentation accuracy | sec. | ±120 | |
| Repeat positioning accuracy | sec. | 60 | |
| Weight | kg | 16 |
所有评论仅代表网友意见，与本站立场无关。