microEnable 5 ironman AQ8-CXP6D是一款PCIe图像采集设备,可让最多四台CoaxPress标准化相机实现全带宽连接microEnable 5 ironman AQ8-CXP6D专门用于高速图像采集,可连接4台CoaXPress相机,并提供DMA3600技术,能获得机器视觉应用
- 支持CoaXPress相机
- 可轻松配置软件 > 高性能的图像采集功能
- 适用于工业领域的多设备、多相机支持
- DMA3600 / 高达3.6 GB/s的PCIe数据带宽(PCIe x8 Gen2)
- 热插拔
- 广泛支持第三方软件接口
- 多样化的应用和行业用途
- 灵活和可扩展的型号系列
- 可通过CoaXPress接口进行供电
文章详情
|
型号名称 | microEnable 5 ironman AQ8-CXP6D |
类别 | 图像采集卡 |
设备功能
|
处理器 | System Processor |
板载内存 | 1 GByte DDR3-RAM |
相机接口
|
标准 | CoaXPress 1.0/1.1 |
配置 | CXP1-6; up to 4 cameras |
接头 | 4 x DIN 1.0/2.3 |
功率输出 | Power over CXP, 13W/24V per cable, SafePower |
相机支持 | line scan camera, area scan camera |
芯片类型 | CFA sensor (Bayer), Grayscale sensor, RGB sensor |
位深 | 8-16-bit (grayscale), 24-48-bit (color) |
数据带宽 | 4 x 6,25 Gbit/s |
测试环境 | Camera Simulator |
主机PC接口
|
PC总线接口 | PCI Express x8 (Gen 2), DMA3600 |
PC总线接口性能 | up to 3.600 MB/s (sustainable) |
控件和通用I/O
|
GPIO同步和控制 | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
GPIO接口概述 | 8in/8out (max.), TTL or opto-coupled |
处理功能
|
基本功能 | Tap Sorting (Sensor Readout Correction), Offset/Gain/Gamma correction, Invert, ROI, Image Selector, LUT |
物理和环境信息
|
尺寸 | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
功耗/电源 | 12 V, 2.5 A |
操作温度 | 0 - 50°C (32°F - 122°F) |
存储温度 | -50 - 80°C (-58°F - 176°F) |
MTBF | on request |
合规 | WEEE, RoHS, REACH |
软件
|
软件驱动程序 | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 32-Bit, Linux 64-Bit |
软件工具 | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), Documentation, microDiagnostics (Service tool), SDK, Device Drivers |
软件API | Silicon Software SDK, .net interface |
FPGA编程 | not programmable |
BV-软件兼容性 | Common Vision Blox, Halcon, VisionPro |
所有评论仅代表网友意见,与本站立场无关。