德国Aircom艾尔康姆R13调节器原件进口
R13
说明:
在线压力调节器具有固定的出口压力,例如,将 10 bar 降低到 5 bar。
其输出压力精度为±30%,因此仅适用于粗压力控制。
只定的压力范围适用于 12 bar 的入口压力。
对于不同的入口压力,请从图中选择合适的设备。
应用:
- 降低事故风险,例如通过低压吹器枪。
- 通过显着降低空气消耗来降低成本。增加使用寿命。
- 减少工具的噪音。
介质:压缩空气或中性气体入口压力
:醉大 15 bar
设置:
压力调节器应根据所需的出口压力进行选择。
出口压力的后续变化是不可能的。
这用于防止意外调整。
反向控制:没有二次通风,因此不适合打钉机。
温度范围: 0°C 至 60°C,使用适当制备的低至 -30°C 的压缩空气。
外壳:黄铜
弹性体: NBR,可选 FKM
Description In-line pressure regulator with factory-set non-adjustable outlet pressure, reducing from e.g. 10 bar to 5 bar.
The regulator R13 is suited for basic pressure control only with an outlet pressure tolerance of ± 30%.
The outlet pressure stated below is valid for 15 bar inlet pressure. For other inlet pressure please refer to
the according item from the diagram.
Benefits • Higher safety through lower pressure. Tools and equipment protected against pressure damages.
• Cost reduction through substantially reduced air consumption. Longer service life.
• Noise reduction for tools.
Media compressed air or non-corrosive gases
Supply pressure max. 15 bar
Adjustment Select the pressure regulator according to the desired outlet pressure.
The outlet pressure cannot be subsequently adjusted. This safeguards against tampering.
Relieving function non-relieving, therefore not recommended for applications such as nailers
Temperature range 0 °C to 60 °C / 32 °F to 140 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Material Body: brass
Elastomer: NBR/Buna-N, optionally FKM
优势品牌如下:
仪器仪表:FLUKE、MEGGER、Time electronics、CATU、泰克、吉时利、
Metrel、Chauvin-arnoux、Amprobe、Flir、ELMA、TTI,Simpson,calmet 等
传感器&光电开关:Schneider,Honneywell,balluff,sick,omron,kistler,
pilz,ifm,banner,wenglor,autonics,S+S,Micronor,solar,schmidt,thermo
sensor,wilcoxon,,Endevco,althen,Solar 等
流量计过滤器: ELIS PLZEN、ETI、MP FILTRI,等
电机伺服编码器:EMS、ESITRON、MICRONOR、FENAC、Baumer、林德、TR、
ELTRA,posital,Hengstler,OEMER,等
连接件轴承:SKIFFY、RAFI、Harting,ilme, LAUMAS、PIZZATO、TELWIN、
SELET SENSOR、TECNA、NIEDAX 桥架等
气缸液压缸:AURORA、CONFORTI、LJM,F.lli Giacomello 等
温湿度传感器:S+S REGELTECHNIK、E+E、MADGETECH 等
如有任何欧美产品需求,请与我们联系
免责声明:内容来源于网络收集整理,仅供参考;本站仅仅是为了更好地提供欧美MRO工业品备件产品信息,方便用户查找、认识欧美工业备品备件。如有疑问,请致电我司。
所有评论仅代表网友意见,与本站立场无关。