德国Aircom艾尔康姆R119调节器大量现货
描述:
隔膜压力调节器采用非常坚固的设计,经过验证的系列。
特别适用于
需要恒定压力和不同流量的情况。从 G2 开始,它是一种先导式
活塞压力调节器,具有出色的控制特性。
介质:压缩空气或中性气体入口压力
:醉大 21 bar
耗气量:从 G2 开始,压力调节器的耗气量约为 0.1 l/min。
调节:
- 带有肘节,锁紧螺母可防止意外调节
- 带有可锁定的控制压力调节器设置按钮,从 G2,
- 可选手轮至 G1 / 2,用于控制面板安装反向控制
:可逆(二次通风),可选不可逆
压力表连接:两侧 G1 / 4,包括螺塞
安装位置:任何
温度范围:
0°C 至 50°C,
使用适当准备的压缩空气低至 -30°C
外壳:压铸锌
内部件:黄铜
膜: NBR底部螺丝
:尼龙,加固
Description High-capacity diaphragm regulator of solid design suitable for many applications. Ideal for installations
where constant line pressure at wide flow variations. From size G2 on it is a pilot-operated piston
regulator with an excellent regulation characteristic curve.
Media compressed air or non-corrosive gases
Supply pressure max. 21 bar
Air consumption from size G2 on the regulator’s air consumption is about 0.1 l/min.
Adjustment by T-handle with locknut
from size G2 on by plastic knob with snap-lock on the pilot regulator
up to size G1/2 optionally by handwheel, for control panel integration
Relieving function relieving, optionally non-relieving
Gauge port G1/4 on both sides of the body, screw plugs supplied Mounting position any
Temperature range 0 °C to 50 °C / 32 °F to 122 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Material Body: zinc die-cast Inner valve: brass
Diaphragm: NBR/Buna-N Bottom screw: reinforced nylon
优势品牌如下:
仪器仪表:FLUKE、MEGGER、Time electronics、CATU、泰克、吉时利、
Metrel、Chauvin-arnoux、Amprobe、Flir、ELMA、TTI,Simpson,calmet 等
传感器&光电开关:Schneider,Honneywell,balluff,sick,omron,kistler,
pilz,ifm,banner,wenglor,autonics,S+S,Micronor,solar,schmidt,thermo
sensor,wilcoxon,,Endevco,althen,Solar 等
流量计过滤器: ELIS PLZEN、ETI、MP FILTRI,等
电机伺服编码器:EMS、ESITRON、MICRONOR、FENAC、Baumer、林德、TR、
ELTRA,posital,Hengstler,OEMER,等
连接件轴承:SKIFFY、RAFI、Harting,ilme, LAUMAS、PIZZATO、TELWIN、
SELET SENSOR、TECNA、NIEDAX 桥架等
气缸液压缸:AURORA、CONFORTI、LJM,F.lli Giacomello 等
温湿度传感器:S+S REGELTECHNIK、E+E、MADGETECH 等
如有任何欧美产品需求,请与我们联系
免责声明:内容来源于网络收集整理,仅供参考;本站仅仅是为了更好地提供欧美MRO工业品备件产品信息,方便用户查找、认识欧美工业备品备件。如有疑问,请致电我司。
所有评论仅代表网友意见,与本站立场无关。