JIS Z 8901 试验粉尘灰灰尘灰尘-华虹科技有限公司

JIS Z 8901 试验粉尘灰灰尘灰尘

JIS Z 8901 试验粉尘列表

　　JIS粉尘是依据 JIS（Japanese Industrial Standard，即日本工业标准）生产的试验粉尘，常被用于一些日系产品的检测。
　　本公司*为广大**用户提供日本进口的下述检测杂质，包括JIS Z 8901的试验粉尘和玻璃珠产品；请在与我们联系的时候描述清楚您需要的是下面哪种产品：

JIS Z 8901

*Classification

Class

Material used

Median *
diameter
( µm )

Particle
density
( g/cm3 )

Chemical composition
% ( mass )

Class 1
Class 2
Class 3

Quartz sａnd

185 to 200
27 to 31
6.6 to 8.6

2.6 to 2.7

SiO2		95min
Fe2O3, Al2O3,TiO2 MgO,Ign.loss		5max

Class 4
Class 9

Talc

7.2 to 9.2
4.0 to 5.0

2.7 to 2.9

SiO2 ••• 60 to 63,	Al2O3 ••• 0 to 3,	MgO ••• 30 to 34
Fe2O3 ••• 0 to 3,	CaO ••• 0 to 2,	Ign.loss ••• 3 to 7

Class 5
Class 10

Fly ash

13 to 17
4.8 to 5.7

1.95 min

SiO2Åc45min
Ign.lossÅc5max

Class 7
Class 8
Class 11

**
KANTO
(Japanese) loam

27 to 31
6.6 to 8.6
1.6 to 2.3

2.9 to 3.1

SiO2 ••• 34 to 40,	Al2O3 ••• 26 to 32,	MgO ••• 0 to 7
Fe2O3 ••• 17 to 23,	CaO ••• 0 to 3,	Ign.loss ••• 0 to 4

Class 12

Carbon black

Particle size range ••• 0.03 to 0.20 µm
Absorbed amount of DBP ••• 25 to 34 ml/100g
Adsorbed amount of iodine ••• 22 to 30 mg/g

Class 16
Class 17

Calcium-
carbonate (heavy)

3.6 to 4.6
1.9 to 2.4

2.7 to 2.8

CaO ••• 54 to 56,	SiO2 ••• 0 to 3,	Ign.loss ••• 42 to 45
MgO ••• 0 to 3,	Fe2O3 ••• 0 to 1

*	Particle size distributions are defined by JIS Z 8901.
**	Sintered at 800°C, 2hours.
Note :1)	Class15 Mixed powder is distributed by Japan Air Cleaning Association and contains 72% of Class8, 23% of Class12 and 5% of cotton linter.
2)	Class13 and Class 14 are now absent ones.

*Particle size distribution of Test Powders 1

Particle size distribution of
Class 1, Class 2 and Class 3
( Quartz sａnd )

Particle size µm	Oversize(on mass basis)%
Particle size µm	Class 1	Class 2	Class 3
5	-	88±5	61±3
10	-	76±3	43±3
20	-	62±3	27±3
30	-	50±3	15±3
40	-	39±3	9±3
45	99 min.	-	-
75	90±3	20max.	3max.
106	80±3	-	-
150	65±3	-	-
212	45±3	-	-
300	1max.	-	-

Particle size distribution of
Class 4 and Class 9
( Talc )

Particle size µm	Oversize(on mass basis)%
Particle size µm	Class 4	Class 9
2	-	79±5
4	-	55±5
5	69±5	-
8	-	23±5
10	40±5	-
16	-	6±3
20	12±5	-
30	-	-
40	3±3	-
75	1max	-

Particle size distribution of
Class 5 and Class 10
( Fly ash )

Particle size µm	Oversize(on mass basis)%
Particle size µm	Class 5	Class 10
2	-	82±5
4	-	60±3
5	84±5	-
8	-	22±5
10	60±5	-
16	-	3±3
20	32±5	-
30	15±3	-
40	8±3	-
106	1max.	-

Particle size distribution of
Class 7, Class 8 and Class 11
( KNATO(Japanese) loam )

Particle size µm	Oversize(on mass basis)%
Particle size µm	Class 7	Class 8	Class 11
1	-	-	65±3
2	-	-	50±5
4	-	-	22±3
5	88±5	61±5	-
6	-	-	8±3
5	-	-	3±3
10	76±3	43±3	-
20	62±3	27±3	-
30	50±3	15±3	-
40	39±3	9±3	-
75	20max.	3max.	-

Class 12 Particle size range
( Carbon black )

0.03~0.20µm

Particle size distribution of
Class 16 and Class 17
( Calcium carbonate( heavy ))

Particle size µm	Oversize(on mass basis)%
Particle size µm	Class 16	Class 17
1	-	80±5
2	76±5	54±5
4	-	18±5
5	40±5	-
8	-	4±3
10	10±5	-
16	-	1max.
20	1max.	-

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Glass beads GBL type

Material used : Soda lime-silicate glass
Particle density : 2.1 to 2.5 g/cm3
Refractive index : 1.51 to 1.53

Particle size distribution

( Unit :µm ) ( % mass basis )

Class	Particle size in case of 90% oversize	Particle size in case of 50% oversize	Particle size in case of 10% oversize
GBL-30	26 min.	30 ± 1.0	34 max.
GBL-40	37 min.	40 ± 1.0	45 max.
GBL-60	55 min.	59 ± 1.0	63 max.
GBL-100	95 min.	100 ± 1.0	105 max.

Glass beads GBM type

Material used : Barium-titanate glass
Particle density : 4.0 to 4.2 g/cm3
Refractive index : 1.92 to 1.94

Particle size distribution

( Unit :µm ) ( % mass basis )

Class	Particle size in case of 90% oversize	Particle size in case of 50% oversize	Particle size in case of 10% oversize
GBM-20	18 min.	22 ± 1.0	26 max.
GBM-30	26 min.	30 ± 1.0	34 max.
GBM-40	37 min.	40 ± 1.0	45 max.

White fused alu mina

Material used : Al2O3 99% min.
Particle density : 3.9 to 4.0 g/cm3

Particle size distribution

( Unit :µm ) ( % mass basis )

Class	Particle size in case of 94% oversize	Particle size in case of 50% oversize	Particle size in case of 3% oversize
	0.8 min.	2 ± 0.5	5 max.
No.2	2.0 min.	4 ± 0.5	11 max.
No.3	4.5 min.	8 ± 0.6	20 max.
No.4	9.0 min.	14 ± 1	31 max.
No.5	20 min.	30 ± 2	58 max.
No.6	40 min.	57 ± 3	103 max.

ISO 12103-1 A2 Fine Test Dust A2粉 ISO 12103-1 A4 Coarse Test Dust A4粉 ISO 12103-1 A3 Medium Test Dust A3粉 MTD粉尘 Arizona Test Dust Fractions 亚利桑那试验粉尘

MIL 810E4 Silica Sａnd & Dust Iron Oxide 波特兰水泥 Type I Glass Beads 玻璃珠 PV 树脂（喷融树脂）汽车**带测试粉尘ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液态杂质SoftC-2A Quartzose Mineral Dust DMT emission test dust (IEC 60312 5.1.2.5) Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3) Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sａnd (IEC 60312 5.1.2.1) A2 ISO 细灰 A4粗灰亚利桑那沙子亚利桑那试验粉尘美国ISO MTD粉尘

A2测试粉 A3中级试验粉尘 AC DUST A2 粉尘 ISO 试验粉尘亚力桑那A2粉尘美国PTI碳黑粉尘 ISO 12103-2 M2铝粉 A2 ISO 细灰 ISO 12103-2 M3铝粉 ISO 12103-2 M4铝粉 ISO 12103-2 M5铝粉 JIS CLASS 2级粉尘 PTI 粉尘 Nominal 0-5 Arizona Test Dust PTI 粉尘 Nominal 10-20 Arizona Test Dust PTI 粗粉 PTI 粉尘 Nominal 20-40 Arizona Test Dust 试验用粉尘12103-1 A2类粗粉粗灰美国亚利桑那A1粉 FLY ASH 飞灰 Portlａnd Cement波特兰水泥美国亚利桑那M5粉 APPIE JIS Z 8901 CLASS 1 试验粉尘 APPIE JIS试验用粉体1 8种 APPIE关东粉 APPIE JIS test powders 1 class8 日本粉体工业技术协会APPIE APPIE JIS Z 8901 试验用粉体1， CLASS 8 APPIE JIS Z 8901 CLASS 15 粉尘 COTTON LINTERS 棉花纤维铁粉（赤）氧化铁 Carbon Black炭黑 Ashrae test dust with carbon black 試験用粉体１の7種, 8種, 11種 JIS粉尘是依据 JIS（Japanese Industrial Standard，即日本工业标准）生产的试验粉尘，常被用于一些日系产品的检测。
　　本公司*为广大**用户提供日本进口的下述检测杂质，包括JIS Z 8901的试验粉尘和玻璃珠产品；请在与我们联系的时候描述清楚您需要的是下面哪种产品Quartz sａnd Talc Fly ash KANTO (Japanese) loam Carbon black Calcium- carbonate (heavy) Glass beads GBL type Glass beads GBM type White fused alu mina JIS Z8901 1 种(硅砂) JIS Z8901 3 种（硅砂）JIS Z8901 4 种（）JIS Z8901 7 种（关东粉）JIS Z8901 8 种（关东粉）铁粉 0-5微米Fe3O4